Using Pressure Injection Technology

  • Using Pressure Injection Technology
  • Direct pressure injection system
  • Variable rate response apply liquid through the manifold
  • No freezing lines…  with terminal injection orifices
  • Improved accuracy in cold weather
  • Requires about 5 gallons of hydraulic flow nominal
  • A major breakthrough in the application of NH3 and with the assurance of long-term use
  • Precision accuracy, safety, economic crop response and significant environmental improvements in the use of NH3
  • Reduce NH3 usage to add to your bottom line
  • Add sectional to any high pressure system to reduce over spray and ensure even distribution of your fertilizer

Rate controller compatibility with John Deere GS2 GS3, Topcon X30, Case IH, and Raven Precision Controllers

The N-Shooter

  1. Designed for VR (variable rate application) apply NH3 as liquid through the manifolds in uniform bands 1% CV
  2. No freezing boots or lines with TIO’s (temlinal injection orifices)
  3. Improved accuracy at faster application speeds in cold weather
  4. Using components & Pressure Injection technology with pressures just above tank pressure
  5. The  N-Shooter is compatible to most field monitor / controllers (John Deere GS2 & GS3, Raven Precision Controllers, Topcon X20 & X30, Case IH Field Pro 600 & 700, Field IQ, Dickey-john IntelliAg and others)
  6. Requires about 3-5 gallons of hydraulic flow nominal for most applicators
  7. Sponsler SS flow meters with 1% CV between 2 to 18 gpm is more reliable since they are designed for pump pressure applications and can regulate at 20 pounds N per acre on 60 feet at 5 mph about 2.5 gallons per minute NH3 to 18 gallons per minute in 3 seconds. Excellent for VR site specific application
  8. Corken 2″ PD pump which has years of reliable experience in industrial applications ie: NH3 & Propane plants and delivery trucks
  9. Max application rate based on adequate Anhydrous Ammonia flow to the 2″ Corken pump ie: 60ft of Applicator 5 mph, 1251bs actual lbs N per acre (18gpm NH3) and apply as low as 201bs/acre (2.87GPM NH3), Where higher application rates are required upgrades can be made to the base model

N-Shooter NH3 pressure system materials list:

  • 2″ Corken pump and modulation valve hydraulic driven clw mounting base
  • Sponsler 3/4″ industrial flow meter with 1% CV between 2 to 18 gpm
  • Eaton hydraulic components
  • Strainer 40 mesh 1/2 gallon reservoir

Options Available:

  • Manifolds clw shut off valves
  • TlO orifices and manifold orifice adaptors
  • 1/8npt for 3/16 hose barb & collars
  • 3/16 od x .137 id black line loom
  • conductors in 15 foot lengths with corrugated protection covers
  • 15ft 1/2″ Red Hose to feed manifolds
  • Additional manifold lines, adaptors & TIO’s
  • Sectional controller valves 1/2″ 12VDC .8 sec cycle time (requirement for variable rate response time)
  • Manual sectional control .8 sec cycle time
  • GPS Sectional control .8 sec cycle time