Our Equipment

N-Shooter Liquid NH3 Injection Using Precision Technologies

Designed for VR (variable rate application) apply NH3 as streaming liquid through the manifolds in uniform bands

No freezing boots or lines with TIO’s (terminal injection orifices)

Improved accuracy at faster application speeds in cold weather

Using Precision components & technology with injection pressures just above tank pressure

The N-Shooter is adaptable to most controllers (Raven, Tee jet and including ISO-Bus. John Deere GS2 and GS3, Case IH Pro 600&700,Trimble and Agco)

Requires about 3-5 gallons of hydraulic flow nominal for most applicators

Sponsler SS flow meters with 1% CV between 2 to 28 gpm is more reliable since they are designed for pump pressure applications and can regulate at 20 pounds N per acre on 60 feet at 5 mph about 2.5 gallons per minute NH3 to 28 gallons per minute in 3 seconds. Excellent for VR site specific application and sectional control

Corken 2” PD pump which has years of reliable experience in industrial applications ie: NH3 & Propane plants and delivery trucks

Max application rate based on adequate Anhydrous Ammonia flow to the 2” Corken pump ie: 60ft of Applicator 6.5 mph, 110lbs actual lbs N per acre (20gpm NH3) and apply as low as 15lbs/acre (2.8GPM NH3). Where higher application rates are required upgrades can be made to the base module

NH3 PRODUCT LINES:
Raven
Continental NH3
Squibb Taylor
Goodall NH3
Dickey-john Accessories